Our P Series - the Tough - now includes the new multifunction beacon PDMC5 with integrated M12 connector. The new model complements the existing P Series product range of pre-wired and impact-resistant beacons (IK08, IP67 & IP69).
With its M12 5-pin connector, the new PDMC5 multifunction beacon enables a very easy, simple, and fast plug & play installation. Compared to the pre-wired P Series models, the installation effort for this specific model is significantly lower. The simple mounting with M12 connector prevents installation mistakes and the high degree of protection IP69 is maintained.
The multifunction beacon with a diameter of 75mm combines the functions steady, flashing, strobe, and rotating light in just one product. All light patterns can be switched externally.
see product page
The P Series from Auer Signal is designed for applications in extreme environments such as dust, ice, rain, or heat. The high degree of protection IP67 and IP69 meets these requirements and ensures safety and a reliable warning, even in the harshest conditions.
Except for the new PDMC5, all P Series models are available in high and low lens versions, pre-wired and ready to mount with pre-mounted stainless steel screws. The product P Series includes LED multi strobe beacons, steady/flashing beacons and multi color beacons as well as xenon strobe beacons.
|
P Series with M12 connector
|
P Series with high lens
|
P Series with low lens
|
All P Series beacons comply with the degree of protection IP67 and IP69. Depending on the installation, IP69 is maintained. With an open mounting method using e.g. a bracket an IP rating of IP69 can be reached. Using the provided flat gasket for surface mount such as tube mounting (accessory PMR) or bracket mount (accessory PVW) an IP rating of IP66 and IP67 is achievable.
The PDMC5 is Auer Signal's first single beacon with integrated M12 connector. Additionally, we offer M12 bases for our signal towers PC7, CT5, ECO40 and ECO60.
|
|
|
|
PC7MC5 & PC7MC8 |
CT5MC5 |
|
|
|
|
YMC |
ZMC |